Functional Testing; Power Transmission; Testing The Optical Speed Module - HBM T10FS Mounting Instructions

Settings
62
8.4

Functional testing

8.4.1

Power transmission

If you suspect that the transmission system is not
working properly, you can remove the stator cover and
test for correct functioning. If the LED is on, the rotor and
stator are properly aligned and there is no interference
with the transmission of measurement signals. When the
calibration signal is triggered, the LED shines more
brightly.
Fig. 8.5 Power transmission function test
8.4.2

Testing the optical speed module

When required, you can test the correct functioning of
the speed measuring system.
S Remove the cover of the stator housing.
S Turn the rotor by at least 2 min
A0785-150 HBM: public
Control LED
-1
.
T10FS