Change History; Mod/Tag Identification - Xerox VersaLink B7025 Service Manual

Change History

This is the launch version of the service manual.
Introduction
Change History, Mod/Tag Identification

Mod/Tag Identification

Figure 1 shows the Mod/Tag identification symbols.
These with tag symbols are used to identify the components
or configurations that are part of a machine change covered
by this tag number.
These without tag symbols are used to identify the
components or configurations that are used when this
tag is not fitted.
Figure 1 Mod/Tag identification symbols
April 2017
iv Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
Launch Issue