Iit Cdi I/F Mismatch Rap - Xerox VersaLink B7025 Service Manual

003-311 IIT CDI I/F Mismatch RAP

003-311 During controller initialization, the IIT CDI I/F has insufficient information from the IIT.
Procedure
Reload the software, GP 4.
Launch Issue
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
003-318, 003-319 IIT Software Fail RAP
003-318 IIT software is corrupt.
003-318 Video driver detection fail.
Procedure
Ensure that the electricity to the machine is switched off while performing tasks that do
not need electricity. Refer to
death or injury. Moving parts can cause injury.
Perform the steps that follow:
1. Switch off, then switch on the machine,
2. Ensure that all connectors on the drive PWB,
Item 6 are securely connected. Ensure all surface mounted modules on both PWBs are
securely connected.
3. Reload the software, GP 4.
4. Perform the OF2 Special Boot Modes RAP.
April 2017
2-17
WARNING
GP 10. Disconnect the power cord. Electricity can cause
GP 10.
PL 1.10 Item 3 and the ESS PWB,
Status Indicator RAPs
003-311, 003-318, 003-319
PL 3.10