Removal Of The Fuel Pump - Rotax 125 MAX evo Repair Manual

Figure 6.2: Carburetor and intake silencer
______________________________________________________

REMOVAL OF THE FUEL PUMP

Instruction See
To remove the fuel pump the following steps are required:
1. Loosen 2 Allen screws M6 with washers fixed by lock nuts.
2. Remove the fuel pump (1) from the support bracket (2).
Chapter 6
Page 4
BRP-Rotax
REPAIR MANUAL
1 Fuel line to the carburetor
3 Carburetor
5 Allen screw M6x25
Pipe clamp 51
7
Figure: Fuel pump.
Impulse line
2
Fuel pump
4
Support bracket
6
8 Intake silencer
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0