Installation Of The Fuel Pump - Rotax 125 MAX Installation Instructions And Operators Manual

8) Installation of the fuel pump

Procedures
Graphic
Effectivity: 125 MAX/Junior MAX/Mini MAX/Micro MAX
Edition 1/Rev. 0
See Fig. 6.
Step
1 Attach the fuel pump (4) with the 2 supplied Allen screws
M6x20 and locking nuts on the bottom of the bracket (5) for
the intake silencer.
2 Remove the 3 lower attachment screws of the carburetor
socket.
3 Then attach the bracket (5) to the cylinder utilizing the three
lower screws of the carburetor socket.
Tightening torque 6 Nm (53 in lb.).
NOTE: The fuel pump should be mounted so that the
connection for the impulse shows down and the
connection for the fuel inlet is in direction of the
driver's seat.
1. Impulse fitting
3. Fuel outlet
5. Bracket
Fig. 6
BRP-Powertrain
Procedure
4
2
1
5
2. Fuel inlet
4. Fuel pump
3
4
KD00065, KD00124
page 1-16
February 01/2014