Removal Of The Clutch And Starter Gear Assy; Removal Of The Centrifugal Clutch Assy; Removal Of The Electric Starter - Rotax 125 MAX evo Repair Manual

REMOVAL OF THE CLUTCH AND STARTER GEAR ASSY.

REMOVAL OF THE CENTRIFUGAL CLUTCH ASSY.

Safety
instructions
Danger of severe burns and scalds! Always allow the engine to cool down to am-
Overflowing and split gasoline must be absorbed immediately with a binding agent and
correctly disposed of. Do not work with open flames and sources of ignition. Fuel must

REMOVAL OF THE ELECTRIC STARTER

Instruction See
1. Disconnect electrical connection from the starter.
2. Remove the electric starter (1) completely by unscrewing 2 Allen screws M6x35 (3) from the
crankcase and gearbox case.
Figure 7.3: Electric starter
Chapter 7
Page 4
BRP-Rotax
REPAIR MANUAL
bient temperature before starting any work.
Danger of explosion and ignition!
not be allowed to come into contact with hot engine parts and components.
Figure: Electric starter
1 Electric starter
3 Allen screw M6x35
m WARNING
m WARNING
Starter support
2
4 Allen screw M6x30
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0