Removal; Gearbox Oil Line Assy - Removal - Rotax 915 i A Series Maintenance Manual

REMOVAL

For removal of the propeller gearbox, see
the relevant Maintenance Manual Line for
the respective engine type 915 i A Series.
Preparation
Before the propeller gearbox is removed, the gear-
box oil line assy. must be removal.
GEARBOX OIL LINE ASSY – REMOVAL
Step Procedure
1 Loosen banjo bolts M10x1x19 with two
sealings rings on both sides of the gear-
box and oil pump housing.
2
Loosen the hex./torx-flange screw M8x16
form the cable clamp and remove the
gearbox oil line assy.
Figure 6.5
Effectivity: 915 i A Series
Edition 0/Rev. 1
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Figure 6.6
Oil inlet flange
1
adaptor
Sealing rings A 10x14
3
Banjo bolt M10x1x34
5
7 Lock washer A8
Oil pump housing
9
Banjo bolt M10x1x19
2
Gearbox oil line assy.
4
6 Cable clamp 8/M8
Hex./Torx-flange screw
8
M8x16
10 Turbo pressure oil line
72–10–00
Page 9
June 01 2019