Leak Tests; Checking The Fuel Lines; Checking The Fuel Pressure Regulator - Rotax 915 i A SERIES Maintenance Manual

LEAK TESTS

General note
Instruction To check the following steps are necessary:
Step

CHECKING THE FUEL LINES

General note
See
Instruction
Step

CHECKING THE FUEL PRESSURE REGULATOR

General note
Step
Effectivity: 915 i A Series
Edition 0/Rev. 0
MAINTENANCE MANUAL
Avoid over-tightening the fastening elements. Use a suitable torque wrench for
Procedure
1 Inspect all fuel lines (steel on engine), their connections and unions.
2 Inspect the fuel lines (steel on engine) for sign of chafing.
Chapter 05–10–00 section Time limit for
Procedure
1 Check fuel line (of steel).
Procedure
1 Check the fuel pressure regulator (1) for damages and inspect the general
condition.
2 Perform a leak test.
3 Inspect all connections (2) for secure attachment.
BRP-Rotax
ATTENTION
all work.
parts.
12–20–00
Page 23
December 01 2017