Centrifugal Clutch; Overload Clutch - Rotax 125 DD2 MAX EVO Operator's Manual

CENTRIFUGAL CLUTCH

The engine is equipped with a centrifugal clutch operating in an oil bath. This clutch sepa-
rates the engine from the gearbox at less than 2.500 rpm. Only at an engine speed of ap-
prox. 4.000 rpm. the centrifugal clutch is completely engaged.
________________________________________________________________

OVERLOAD CLUTCH

The engine has a mechanical overload clutch, which is installed on the rear axle. It is to
protect the crankshaft from hard shocks from the drive components which are not usual
during normal operation (e.g. the blocking of the rear axle).
Effectivity: 125 MAX DD2 evo
BRP-Rotax
Operators Manual
1
Page 5
Edition: March 01 2021