Mac Address-Table Thrash-Limit - Allied Telesis x310-26FT Command Reference Manual

S C
WITCHING OMMANDS
- -
MAC ADDRESS TABLE THRASH LIMIT

mac address-table thrash-limit

Overview Use this command to set the thrash limit on the device or stack.
Thrashing occurs when a MAC address table rapidly "flips" its mapping of a single
MAC address between two subnets, usually as a result of a network loop.
Use the no variant of this command to disable thrash limiting.
mac address-table thrash-limit <rate>
Syntax
no mac address-table thrash-limit
Default No thrash limiting
Mode Global Configuration
Usage Use this command to limit thrashing on the selected port range.
Example To apply a thrash limit of 100 MAC address flips per second:
awplus#
awplus(config)#
Related show mac address-table thrash-limit
Commands
C613-50103-01 REV A
Parameter Description
<rate>
sets the maximum thrash rate at which limiting is applied. This rate can
be set between 5 and 255 MAC thrashing flips per second. Once the
thrash limit rate is reached, the port is considered to be thrashing.
configure terminal
mac address-table thrash-limit 100
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
446