Linkflap Action - Allied Telesis x310-26FT Command Reference Manual

S C
WITCHING OMMANDS

LINKFLAP ACTION

linkflap action
Overview Use this command to detect flapping on all ports. If more than 15 flaps occur in less
than 15 seconds the flapping port will shut down.
Use the no variant of this command to disable flapping detection at this rate.
Syntax linkflap action [shutdown]
no linkflap action
Default Linkflap action is disabled by default.
Mode Global Configuration
Example To enable the linkflap action command on the device, use the following
commands:
awplus#
awplus(config)#
C613-50103-01 REV A
Parameter
linkflap
action
shutdown
configure terminal
linkflap action shutdown
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Description
Global setting for link flapping.
Specify the action for port.
Shutdown the port.
437