I
C
NTERFACE
OMMANDS
(
)
DESCRIPTION
INTERFACE
description (interface)
Overview
Use this command to add a description to a specific port or interface.
description <description>
Syntax
Mode
Interface Configuration
Example
The following example uses this command to describe the device that a switch
port is connected to.
awplus#
awplus(config)#
awplus(config-if)#
C613-50103-01 REV A
Parameter
Description
<description>
Text describing the specific interface.
configure terminal
interface port1.0.2
Command Reference for x310 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
description Boardroom PC
384