Command Manual – System Management
Quidway S8500 Series Routing Switches
Example
# Enable NTP authentication function.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ntp-service authentication enable
7.1.7 ntp-service authentication-keyid
Syntax
ntp-service authentication-keyid number authentication-mode md5 value
undo ntp-service authentication-keyid number
View
System view
Parameter
number: Key number, ranging from 1 to 4,294,967,295.
value: Value of the key with 1 to 32 ASCII characters.
Description
Use the ntp-service authentication-keyid command to set NTP authentication key.
Use the undo ntp-service authentication-keyid command to cancel the NTP
authentication key.
By default, there is no authentication key.
Only MD5 authentication is supported for the NTP authentication key settings.
Example
# Set MD5 authentication key 10 as huawei.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] ntp-service authentication-keyid 10 authentication-mode md5 huawei
7.1.8 ntp-service broadcast-client
Syntax
ntp-service broadcast-client
undo ntp-service broadcast-client
View
VLAN interface view
Huawei Technologies Proprietary
7-6
Chapter 7 NTP Configuration Commands