Ntp-Service Broadcast-Client; Ntp-Service Broadcast-Server - Huawei Quidway S3900 series Command Manual

Command Manual – NTP
Quidway S3900 Series Ethernet Switches-Release 1510
Example
# Configure an MD5 authentication key, with the key ID being 10 and the key being
BetterKey.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway]
BetterKey

1.1.7 ntp-service broadcast-client

Syntax
ntp-service broadcast-client
undo ntp-service broadcast-client
View
VLAN interface view
Parameter
None
Description
Use the ntp-service broadcast-client command to configure an Ethernet switch to
operate in the NTP broadcast client mode and receive NTP broadcast packets through
the current interface.
Use the undo ntp-service broadcast-client command to cancel the configuration.
By default, no switch operates in the broadcast client mode.
Example
# Configure the switch to operate in the broadcast client mode and receive NTP
broadcast packets through VLAN interface 1.
<Quidway> system-view
System View: return to User View with Ctrl+Z.
[Quidway] interface Vlan-interface1
[Quidway-Vlan-interface1] ntp-service broadcast-client

1.1.8 ntp-service broadcast-server

Syntax
ntp-service broadcast-server [ authentication-keyid key-id | version number ]*
undo ntp-service broadcast-server
ntp-service authentication-keyid
Huawei Technologies Proprietary
Chapter 1 NTP Configuration Commands
10
1-7
authentication-mode md5