Enabling Pppoe+ Globally; Configuring The Format And Contents Of Fields To Be Added To Pppoe Packets; Configuring The Action For Processing Original Fields In Pppoe Packets - Huawei Quidway S3700 Series Configuration Manual

Quidway S3700 Series Ethernet Switches
Configuration Guide - Security

7.3.2 Enabling PPPoE+ Globally

Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pppoe intermediate-agent information enable
PPPoE+ is enabled globally.
After the pppoe intermediate-agent information enable command is run in the system view,
PPPoE+ is enabled on all the interfaces.
By default, PPPoE+ is disabled globally.
----End
7.3.3 Configuring the Format and Contents of Fields to Be Added
To PPPoE Packets
Context
After PPPoE+ is enabled globally, the user-side interface on the S3700 adds information in
common format to the received PPPoE packets. You can modify the format of the field to be
appended through this task.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pppoe intermediate-agent information format { circuit-id | remote-id } { common |
extend | user-defined text }
The format and contents of fields to be added to PPPoE packets are set.
After the pppoe intermediate-agent information format command is run in the system view,
all the interfaces add fields in specified format to the received PPPoE packets.
----End
7.3.4 Configuring the Action for Processing Original Fields in
PPPoE Packets
Context
You can configure the action for processing original fields in PPPoE packets in the system view
and in the interface view. The configuration in the system view is valid for all the interfaces. To
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 PPPoE+ Configuration
196