Display Poe Pse - Huawei Quidway S8500 Series Command Manual

Command Manual – PoE
Quidway S8500 Series Routing Switches
View
Any view
Parameter
interface-name | interface-type interface-num: Port on the switch; refer to Command
Manual – Port for details.
Description
Use the display poe interface power command to display the PoE power information
of a specific port or all ports on the switch.
Example
# Display the power information of the port GigabitEthernet3/1/1.
<Quidway> display poe interface power GigabitEthernet3/1/1
Port power

1.1.3 display poe pse

Syntax
display poe pse
View
Any view
Parameter
None
Description
Use the display poe pse command to display the parameters of all the PoE cards in
the switch that serve as a power sourcing equipment (PSE).
Example
# Display the parameters of all the PoE cards in the switch.
<Quidway> display poe pse
PSE Information of board 6:
Power Current Value
Power Remaining Value
Power Max Value
Power Peak Value
Power Average Value
Software Version
:700 mW
:67 W
:738 W
:806 W
:1 W
:0 W
:290
Huawei Technologies Proprietary
1-3
Chapter 1 PoE Configuration Commands