Console Port Login Configuration With Authentication Mode Being Password; Configuration Procedure - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
<Quidway> system-view
# Enter AUX user interface view.
[Quidway] user-interface aux 0
# Specify not to authenticate users logging in through the Console port.
[Quidway-ui-aux0] authentication-mode none
# Specify commands of level 2 are available to users logging into the AUX user
interface.
[Quidway-ui-aux0] user privilege level 2
# Set the baud rate of the Console port to 19,200 bps.
[Quidway-ui-aux0] speed 19200
# Set the maximum number of lines the screen can contain to 30.
[Quidway-ui-aux0] screen-length 30
# Set the maximum number of commands the history command buffer can store to 20.
[Quidway-ui-aux0] history-command max-size 20
# Set the timeout time of the AUX user interface to 6 minutes.
[Quidway-ui-aux0] idle-timeout 6
2.5 Console Port Login Configuration with Authentication
Mode Being Password

2.5.1 Configuration Procedure

Table 2-6 Console port login configuration with the authentication mode being
password
Operation
Enter system view
Enter
interface view
Configure
authenticate
using
password
Set
password
Command
system-view
AUX user
user-interface aux 0
to
users authentication-mode
the local password
set
the local
password { cipher |
simple } password
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
—
—
Required
By default, users logging into a
switch through the Console port
are not authenticated; while those
logging in through Modems or
Telnet are authenticated.
authentication
Required
2-9
Description