Console Port Login Configuration With Authentication Mode Being Password; Configuration Procedure - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
2.5 Console Port Login Configuration with Authentication
Mode Being Password

2.5.1 Configuration Procedure

Table 2-6 Console port login configuration with the authentication mode being
password
Operation
Enter system view
Enter
interface view
Configure
authenticate
using
password
Set
password
Configur
e the
Console
port
Configure
command
available
logging into the user
interface
Make
services available to
the user interface
system-view
AUX user
user-interface aux 0
to
users authentication-mode
the local password
set
the local
password
simple } password
Set the
speed speed-value
baud rate
Set the
check parity { even | none | odd }
mo de
Set the
stopbits { 1 | 1.5 | 2 }
stop bits
Set the
databits { 7 | 8 }
data bits
the
level
to users user privilege level level
terminal
shell
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Command
—
—
Required
authentication
{ cipher | Required
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Optional
By default, the check mode
of a Console port is set to
none, that is, no check bit.
Optional
The default stop bits of a
Console port is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Optional
By default, terminal services
are available in all user
interfaces.
2-9
Description