Console Port Login Configuration With Authentication Mode Being None - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Login
Quidway S3900 Series Ethernet Switches-Release 1510
2.4 Console Port Login Configuration with Authentication
Mode Being None
2.4.1 Configuration Procedure
Table 2-4 Console port login configuration with the authentication mode being none
Enter system view
Enter AUX user interface view
Configure not to authenticate
users
Configure the
Console port
Configure the command level
available to users logging into
the user interface
Make
available
Operation
Set the baud
rate
Set the check
mode
Set the stop
bits
Set the data
bits
terminal services
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Command
system-view
user-interface aux 0
authentication-mode
none
speed speed-value
parity { even | none |
odd }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level
shell
2-6
Description
—
—
Required
By default, users
logging in through
the Console port are
not authenticated.
Optional
The default baud
rate of an AUX port
(also the Console
port) is 9,600 bps.
Optional
By default, the check
mode of a Console
port is set to none,
that is, no check bit.
Optional
The stop bits of a
Console port is 1.
Optional
The default data bits
of a Console port is
8.
Optional
By default,
commands of level 3
are available to
users logging into
the AUX user
interface.
Optional
By default, terminal
services are
available in all user
interfaces.