Console Port Login Configuration With Authentication Mode Being None; Configuration Procedure - Huawei Quidway S3100 Series Operation Manual

Operation Manual – Login
Quidway S3100 Series Ethernet Switches
2.4 Console Port Login Configuration with Authentication
Mode Being None

2.4.1 Configuration Procedure

Table 2-4 Console port login configuration with the authentication mode being none
Operation
Enter system view
Enter AUX user interface
view
Configure
authenticate users
Configure
the
Console
port
Configure the command
level available to users
logging into the user
interface
Make terminal services
available
Set
number
screen can contain
system-view
user-interface aux 0
not to authentication-mode
none
Set the
speed speed-value
baud rate
Set the parity { even | none |
check mode odd }
Set the stop
stopbits { 1 | 1.5 | 2 }
bits
Set the data
databits { 7 | 8 }
bits
user privilege level
level
shell
the maximum
screen-length
of lines the
screen-length
Huawei Technologies Proprietary
Chapter 2 Logging in through the Console Port
Command
—
—
Required
By default, users logging in
through the Console port are
not authenticated.
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Optional
By default, the check mode of
a Console port is set to none,
that is, no check bit.
Optional
The stop bits of a Console
port is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You
screen-length 0 command
to disable the function to
display information in pages.
2-6
Description
can use the