Operation Manual – VLAN
Quidway S3100 Series Ethernet Switches
3)
Configuration workload is reduced. VLAN can be used to group specific hosts.
When the physical position of a host changes, no additional network configuration
is required if the host still belongs to the same VLAN.
VLAN standard is described in IEEE 802.1Q, which is issued by IEEE in 1999.
1.1.2 VLAN Classification
VLANs fall into the following four categories.
Port-based VLAN
MAC address-based VLAN
Protocol VLAN
IP multicast group-based VLAN
Among these VLANs, the members of a port-based VLAN are defined in terms of
switch ports. You can add ports to which close-related hosts are connected to the same
port-based VLAN. This is also the simplest yet most effective way to create VLANs.
Note:
Currently, S3100 series switches only support port-based VLANs.
1.2 VLAN Configuration
1.2.1 Basic VLAN Configuration
Table 1-1 Basic VLAN configuration
Operation
Enter system view
Create
and enter VLAN
view
Assign a name for
the VLAN
Provide
description
for the VLAN
Command
system-view
a
VLAN
vlan vlan-id
name
a
string
description string
Huawei Technologies Proprietary
—
Required
The vlan-id argument ranges
from 1 to 4,094.
Optional
By default, the name of a
VLAN is its VLAN ID.
Optional
By default, the description
string of a VLAN is its VLAN
ID.
1-2
Chapter 1 VLAN Configuration
Description