Limiting Number Of Pim Neighbors On The Interface; Clearing Pim Routing Entries; Clearing Pim Neighbors - Huawei Quidway S6500 Series Operation Manual

Operation Manual - Multicast Protocol
Quidway S6500 Series Ethernet Switches
Table 6-5 Configuring filtering PIM neighbors
Set to filter PIM neighbors
Remove filtering configuration

6.2.7 Limiting Number of PIM Neighbors on the Interface

The maximum number of PIM neighbors of a router interface can be configured to avoid
exhausting the memory of the router or router faults. The maximum number of PIM
neighbors of a router is defined by the system, and is not open for modification.
Please perform the following configurations in interface view.
Table 6-6 Limiting number of PIM neighbors on the interface
Limit number of PIM neighbors on the
interface
Restore the default configuration
By default, the upper limit of PIM neighbors of an interface is 128.
If the number of PIM neighbors of an interface has exceeded the configured value by
the time of configuration, existing PIM neighbors will not be deleted.

6.2.8 Clearing PIM Routing Entries

Please perform the following configurations in user view.
Table 6-7 Clearing PIM routing entries
Operation
Clear PIM
routing
entries

6.2.9 Clearing PIM Neighbors

Please perform the following configuration in user view.
Operation
Operation
reset pim routing-table { all | { group-address [ mask { group-mask |
group-mask-length } ] | source-address [ mask { source-mask |
mask-length source-mask-length } ] | { incoming-interface
{ interface-type interface-number | null } } } * }
Huawei Technologies Proprietary
6-7
Chapter 6 PIM Configuration
Command
pim neighbor-policy acl-number
undo pim neighbor-policy
Command
pim neighbor-limit limit
undo pim neighbor-limit
Command