Displaying And Maintaining Mac Address Table Configuration - Huawei Quidway S3900 Series Operation Manual

Operation Manual – MAC Address Table
Quidway S3900 Series Ethernet Switches-Release 1510 Chapter 1
Table 1-5 Set the maximum number of MAC addresses a port can learn
Operation
Enter system view
Enter Ethernet port
view
Set the maximum
number of MAC
addresses the port
can learn
1.3 Displaying and Maintaining MAC Address Table
Configuration
To verify your configuration, you can display information about the MAC address table
by executing the display command in any view.
Table 1-6 Display and maintain MAC address table configuration
Operation
Display information
about
address table
Display the aging
time of the dynamic
MAC
entries in the MAC
address table
1.4 Configuration Example
I. Network requirements
Log in to the switch through the Console port and enable address table
configuration.
Set the aging time of dynamic MAC address entries to 500 seconds.
Add a static MAC address entry 00e0-fc35-dc71 for Ethernet1/0/2 port (assuming
that the port belongs to VLAN 1)
system-view
interface
interface-number
mac-address
max-mac-count count
display
the MAC
[ display-option ]
display
address
aging-time
Huawei Technologies Proprietary
Command
interface-type
Command
mac-address
mac-address
1-6
MAC Address Table Management
Description
—
—
Required
By default, the number of the
MAC addresses a port can
learn is not limited.
Description
The display command can
be executed in any view.