Voice Vlan Configuration Displaying; Voice Vlan Configuration Example (Automatic Mode) - Huawei Quidway S3900 Series Operation Manual

Operation Manual – Voice VLAN
Quidway S3900 Series Ethernet Switches-Release 1510

1.3 Voice VLAN Configuration Displaying

After the above configurations, you can execute the display command in any view to
view the running status and verify the configuration effect.
Table 1-5 Display configurations of a Voice VLAN
Operation
Display
information about
ports
Voice
configuration fails
Display the voice
VLAN
configuration
status
Display
currently valid OUI
addresses
Display the ports
operating
current
VLAN
1.4 Voice VLAN Configuration Example

1.4.1 Voice VLAN Configuration Example (Automatic Mode)

I. Network requirements
Create VLAN 2 and configure it as a voice VLAN.
Configure GigabitEthernet1/0/1 port as a Trunk port, with VLAN 6 as the default
port.
Ethernet1/0/1 port can be added to/removed from the voice VLAN automatically
according to the type of the data stream that reaches the port.
II. Configuration procedure
# Create VLAN 2.
<Quidway> system-view
[Quidway] vlan 2
# Configure Ethernet1/0/1 port to be a Trunk port, with VLAN 6 as the default VLAN.
[Quidway] interface Ethernet1/0/1
[Quidway-Ethernet1/0/1] port link-type trunk
[Quidway-Ethernet1/0/3] port trunk pvid vlan 6
the
on which display voice vlan error-info
VLAN
display voice vlan status
the
display voice vlan oui
in the
display vlan vlan-id
voice
Huawei Technologies Proprietary
Chapter 1 Voice VLAN Configuration
Command
1-8
Description
You can execute the
display command in any
view.