Mitsubishi GOT1000 Series Connection Manual page 676

(2) SIEMENS S7-200
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Adapter Addrres
Host Address
18 - 12
18.3 Preparatory Procedures for Monitoring
18.3.3 Setting communication interface (Communication settings)
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 19200bps>
Set this item when change the data length used for communication
with the connected equipment.
<Default: 8bit>
Specify the stop bit length for communications.
<Default: 1bit>
Specify whether or not to perform a parity check, and how it is
performed during communication.
<Default: Even>
Specify the adapter addrres(station No. of the PLC to which the
GOT is connected) in the network of the GOT.
<Default: 0>
Specify the host address (station No. of the PLC to which the GOT
is connected) in the network of the GOT.
<Default: 2>
(1) Communication interface setting by Utility
The communication interface setting can be changed on the Utility's
"Communication setting" after downloading "Communication setting" of project
data.
For details on the Utility, refer to the following manual.
GT User's Manual
(2) Precedence in communication settings
When settings are made by GT Designer or the Utility, the latest setting is
effective.
Description Range
9600bps,19200bps,38400bps,
57600bps,115200bps
7bit/8bit
1bit/2bit
None
Even
Odd
0 to 31
1 to 31