28.3.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1
Communication settings
1
Set the CH No. according to the position of communication unit to be mounted to the GOT.
2
Set the communication driver to each CH No..
• Channel No.1: Bus(Q)
• Channel No.2: OMRON SYSMAC
• Channel No.3: OMRON THERMAC/INPANEL NEO
• Channel No.4: MELSERVO-J3,J2S/M
3
Perform the detailed settings for the driver. (
Screen Design Manual
Communication detail settings of each chapter.)
28.3 Preparatory Procedures for Monitoring
28.3.3 Setting communication interface (Communication settings)
25
26
27
28
29
30
31
28 - 7