Connection Cable - Mitsubishi GOT1000 Series Connection Manual

13.2 Connection Cable

The RS-232 cable or RS-422 cable used for connecting the GOT to the PLC should be prepared by the user.
The following provides connection diagrams for each cable, connector specifications and other information.
1 Large-sized H series
PLC CPU
Intelligent serial port
module
*1
2 H-200 to 252 series, H series board type, EH-150 series
PLC CPU
13 - 6
13.2 Connection Cable
RS-232 cable connection diagram
The connection diagram of the cable to be used varies according to the specified
transmission speed.
Model
H-302/702/1002/2002
H-4010
H-300/700/2000
COMM-H, COMM-2H
Can be specified with the CPU software of revision "J" or later.
Model
H-200/250/252/252B
H-252C
H series board type
EH-150 series
Specified transmission
speed
(See section 13.2.1)
4800bps
19200bps
*1
38400bps
Other than above RS-232 cable 1), 2)
RS-232 cable 1)
Specified transmission
speed
(See section 13.2.1)
RS-232 cable 1)
4800bps
19200bps
Other than above RS-232 cable 1), 2)
4800bps
19200bps
38400bps
Other than above RS-232 cable 1), 2)
Connection cable
RS-232 cable RS-422 cable
(See section 13.2.2)
RS-232 cable 1)
RS-232 cable 1)
RS-232 cable 2)
RS-232 cable 2)
RS-232 cable 1)
RS-422 cable
Connection cable
RS-232 cable RS-422 cable
(See section 13.2.2)
RS-232 cable 1)
RS-232 cable 2
RS-232 cable 1)
RS-232 cable 1)
RS-232 cable 2)
RS-232 cable 2)