Mitsubishi GOT1000 Series Connection Manual page 182

4 - 42
4.4 PLC Side Setting
4.4.1 Connecting serial communication module (Q Series)
(1) When the [intelligent function module switch setting] has been set
After writing PLC parameters to the PLC CPU, turn the PLC CPU OFF then back
ON again, or reset the PLC CPU.
(2) Connection of multiple GOTs
To some serial communication module models, two GOTs can be connected using
both CH1 and CH2.
Model
QJ71C24(-R2)
QJ71C24N(-R2/R4)
Connection of 2 GOTs
Function version A
: 2 GOTs connectable, : 1 GOT connectable,
Function version B
: Not applicable