Mitsubishi GOT1000 Series Connection Manual page 587

Graphic operation terminal
Hide thumbs Also See for GOT1000 Series:
Table of Contents

Advertisement

2
Connector specifications
(1) GOT side connector
Use the following as the RS-422 interface and RS-422/485 communication unit connector on the
GOT.
For the GOT side of the RS-422 cable, use a connector and connector cover applicable to the GOT
connector.
(a) Connector type
9-pin D-sub (female)
(b) Connector model
GOT
RS-422 conversion unit 17LE-13090-27(D2AC)
GT11
GT15-RS4-9S
(2) YASKAWA PLC side connector
Use the connector compatible with the YASKAWA PLC side module.
For details, refer to the following manual.
User's Manual for the YASKAWA PLC
3
Precautions when preparing a cable
The length of RS-422 cable 2) must be 300m or less.
The maximum length of RS-422 cable 1) differs according to the specifications of the YASKAWA PLC
side.
For details, refer to the following manual:
User's Manual for the YASKAWA PLC
4
Connecting the terminating resistor
When connecting a YASKAWA PLC to a GOT, connect a terminating resistor to the YASKAWA PLC if
required.
No terminating resistor needs to be connected on the GOT side as one is already built into the GOT.
User's Manual for the YASKAWA PLC
Model
17LE-13090-27(D3AC)
17LE-13090-27(D3AC)
Manufacturer
DDK Ltd.
DDK Ltd.
DDK Ltd.
15.2 Connection Cable
15.2.2 RS-422 cable
9
10
11
12
13
14
15
16
15 - 17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents