Mitsubishi GOT1000 Series Connection Manual page 920

2 Communication detail settings
Item
Transmission Speed
Data Bit
Stop Bit
Parity
Retry
Timeout Time
Delay Time
22 - 20
22.3 Preparatory Procedures for Monitoring
22.3.3 Setting communication interface (Communication settings)
Description
Set this item when change the transmission speed used for
communication with the connected equipment.
<Default: 9600bps>
Set this item when change the data length used for communi-
cation with the connected equipment.
<Default: 8bit>
Specify the stop bit length for communications.
<Default: 1bit>
Specify whether or not to perform a parity check, and how it is
performed during communication.
<Default: None>
Set the number of retries to be performed when a
communication error occurs.
<Default: 0 Times>
Set the time period for a communication to time out.
<Default: 3 Sec>
Set this item to adjust the transmission timing of the
communication request from the GOT.
<Default: 0ms>
Range
9600bps,19200bps,38400bps,
57600bps,115200bps
7bit/8bit
1bit/2bit
None
Even
Odd
0 to 5 Times
3 to 30 Sec
0 to 300 ms