Connecting Serial Communication Board (Cs1W-Scb21, Cs1W-Scb41) - Mitsubishi GOT1000 Series Connection Manual

9.4.8 Connecting serial communication board (CS1W-SCB21, CS1W-
SCB41)
1 Device settings
Write the following set values to devices of each PLC CPU and initialize each port using a peripheral
tool or DM monitor.
Device name
Port 1
D32000
D32001
D32002
*3
D32003
*1 Only transmission speeds available on the GOT side are shown.
*2 Set the same transmission speed as that of the GOT side.
For the transmission speed setting on the GOT side, refer to the following.
*3 Set the host link station No. according to the Host Address setting on the GOT side.
For the Host Address setting on the GOT side, refer to the following.
9 - 52
9.4 PLC Side Setting

9.4.8 Connecting serial communication board (CS1W-SCB21, CS1W-SCB41)

Port 2
8000 (fixed): The settings are:
H
Port setting
Serial communication mode : Host link
D32010 Start bit
Data length
Stop bit
Parity
b15 b8
0
H
1) Transmission speed
D32011
00 : 9600bps
H
05 : 4800bps
H
06 : 9600bps
H
07 : 19200bps
H
D32012
*3
D32013
Section 9.3.3 Setting communication interface (Communication settings)
Section 9.3.3 Setting communication interface (Communication settings)
Setting
: Arbitrary setting
: 1 bit
: 7 bits
: 2 bits
: Even
b7 b0
1)
*1*2
08 : 38400bps
H
09 : 57600bps
H
0A : 115200bps
H
8000 (fixed)
H
0000 to 0001F
H H