Mitsubishi GOT1000 Series Connection Manual page 1010

25.1 System Configuration
Select a system configuration suitable for your application.
1 System configuration and connection conditions
Connection conditions
Number of
Distance
GOT
Varies
according to
1 the bar code
reader's
specifications.
*1 The PLC connection type and communication interface for bar code reader connection are shown below.
25 - 2
25.1 System Configuration
Conventions used in this section
Numbers (e.g. ) of
to the numbers (e.g.
Use these numbers as references when confirming models and applications.
*1
Connect to the PLC.
Varies according to the
connection type.
GOT type
Connection type
Bus connection
MELSECNET/10 connection
(PLC to PLC network)
CC-Link connection
(intelligent device station)
Ethernet connection
Direct CPU connection
Computer link connection
Third party PLC connection
Direct CPU connection
Computer link connection
Third party PLC connection
System configuration and connection conditions correspond
) of System equipment.
System Configuration
1
PLC GOT
Communication interface of
GOT
Bus connection unit
MELSECNET/10
communication unit
CC-Link communication unit
Ethernet communication unit
RS-232 communication unit
RS-422/485 communication unit
RS-422 interface
Communication driver
Extended function OS
Connection type
Barcode
dependent
2
Bar code reader
GOT bar code
Communication interface of
GOT
RS-232 interface