Mitsubishi GOT1000 Series Connection Manual page 298

7.3 PLC Side Settings
This section describes the settings of the GOT and peripheral connection module in the case of the system
configuration shown as
1 System configuration
Switch settings of CC-Link module (Q Series)
[Network parameter] of GX Developer
*1 The CC-Link module is mounted on the base unit slot 0.
7 - 18
7.3 PLC Side Settings
.
(1) Peripheral connection module
For details of the peripheral connection module, refer to the following manual.
Peripheral Connection Module Type AJ65BT-G4-S3 User's Manual (detail
volume)
(2) CC-Link module (Q Series)
For details of the CC-Link module (Q Series), refer to the following manual.
CC-Link System Master/Local Module User's Manual QJ61BT11N
*1
<CC-Link module>
Station type : Master station
Station No.
: Station No. 0
Mode : Remote net (Ver.1 mode)
All connect count
: 1
: 156kbps
Transmission speed
Switch setting of peripheral connection module
The Start I/O No. of the CC-Link module is set to "0"
<AJ65BT-G4-S3>
Station type
Station No.
Number of stations occupied
Transmission speed
[Communication settings] of GT Designer 2
<GOT>
Transmisston speed: 9600bps
: Intelligent device station
: Station No. 1
: Exclusive station 1
: 156kbps