System Configuration Examples - Mitsubishi GOT1000 Series Connection Manual

3 Ethernet setting
(1) Ethernet setting
Item
Host
N/W No.
PLC No.
*1
Type
IP address
*2
Port No.
Communication
*1 Select one of the following [type].
• Ethernet module (Q Series)
• Ethernet module (QnA Series)
• Ethernet module (A Series)
For the applicable Ethernet module, refer to the following.
*2 Set when selecting "AJ71E71".
The port No. is "5001" (fixed) when selecting "QJ71E71/AJ71QE71".
8 - 10
8.2 Preparatory Procedures for Monitoring
8.2.3 Setting communication interface (Communication settings)
The host is displayed.
(The host is indicated with an asterisk (*).)
Set the network No. of the connected Ethernet module.
<Default: blank>
Set the station No. of the connected Ethernet module.
<Default: blank>
Set the type of the connected Ethernet module.
<Default: QJ71E71>
Set the IP address of the connected Ethernet module.
<Default: 192.168.0.1>
Set the port No. of the connected Ethernet module.
<Default: 5001>
UDP (fixed)
Section 8.1 System Configuration
Example of Ethernet setting
For examples of Ethernet setting, refer to the following.
Section 8.3 PLC Side Setting
Description
: QJ71E71
: AJ71QE71
: AJ71E71
Range
-
1 to 239
1 to 64
QJ71E71, AJ71QE71, AJ71E71
0.0.0.0 to 255.255.255.255
1024 to 65534
UDP (fixed)