Mitsubishi GOT1000 Series Connection Manual page 970

2 Perform an I/O check
Whether the inverter can communicate with the GOT or not can be checked by the I/O check function.
If this check ends successfully, it means correct communication interface settings and proper cable
connection.
Display the I/O check screen by [Main Menu]
For details on the I/O check, refer to the following manual:
3 Confirming the inverter side setting
When connecting the GOT, setting is required for the inverter side.
Confirm if the inverter side setting is correct.
All settings related to communications are complete now.
Create screens on GT Designer2 and download the project data again.
23 - 28
23.3 Preparatory Procedures for Monitoring
23.3.7 Checking for normal monitoring
GT User's Manual
Error display
The error information of the inverter side cannot be displayed on the system alarm.
Section 23.4 FREQROL Series Inverter Side Settings
[Debug & self check]
1 Touch [CPU] on the I/O check screen.
Touching [CPU] executes the
communication check with the
connected inverter.
2 When the communication screen
ends successfully, the screen on the
left is displayed.
[Self check] [I/O check].