2
PLC system settings
Make the PLC system settings.
Item
*1*2
Transmission speed
Stop bit
Parity
Data length
*3
Station No.
*1
Only transmission speeds available on the GOT side are shown.
*2
Set the same transmission speed as that of the GOT side.
For the transmission speed setting on the GOT side, refer to the following.
Section 9.3.3 Setting communication interface (Communication settings)
*3
Set the station No. according to the Host Address on the GOT side.
For the Host Address setting on the GOT side, refer to the following.
Section 9.3.3 Setting communication interface (Communication settings)
4800bps/9600bps/19200bps
2 stop bits (fixed)
9.4.3 Connecting CV500/CV1000/CV2000 or CVM1
Setting
Even (fixed)
7 bits (fixed)
00 to 31
9.4 PLC Side Setting
9
10
11
12
13
14
15
16
9 - 43