Mitsubishi GOT1000 Series Connection Manual page 259

(2) Station information setting
Item
*2
Station type
*3
Exclusive station count
Reserve/invalid station select
Intelligent buffer select (word)
*1 When the [Mode] of the CC-Link module is set at [Remote net - (Ver. 2 mode)], [Remote station points] is
available to set.
[Remote station points] is a setting for the remote I/O station.
The default value (32 points) must be used on the GOT.
*2 When the [Mode] of the CC-Link module is set at [Remote net - (Ver. 2 mode)] or [Remote net - Additional mode],
set to [Ver. 1 Intelligent device station].
*3 Set the same number of occupied stations as that on the GOT.
When changing the network parameter
After writing the network parameter to the PLC CPU, operate the PLC CPU ether
turning OFF and then ON or resetting.
*1
Intelligent device station (fixed)
6.3.1 Connecting to CC-Link module (Q Series)
Setting
Exclusive station 1
No setting
(Use default value.)
: Necessary : As necessary
6.3 PLC Side Setting
Setting necessity at GOT
connection
: Not necessary
6 - 23
1
2
3
4
5
6
7
8