Plc Side Settings - Mitsubishi GOT1000 Series Connection Manual

6.3 PLC Side Setting
The GOT operates as the stations of which are shown below in the CC-Link system.
Station data
Station type
Number of stations occupied
The switch settings and parameter settings of the PLC side (CC-Link module) are described in Section 6.3.1
to Section 6.3.3.
CC-Link module (Q Series)
CC-Link module (QnA Series)
CC-Link module (A Series)
Number of stations occupied
Intelligent device station or Ver. 1 intelligent device station
Station 1 or Station 4
Model name
QJ61BT11, QJ61BT11N
AJ61QBT11, A1SJ61QBT11
AJ61BT11, A1SJ61BT11
The number of stations occupied is setting for determining number of link device
points (RX/RY/RWw/RWr) used by the GOT.
To use multiple numbers of link device points in the case of cyclic transmission
between the GOT and CC-Link module, set the number of stations occupied as the
exclusive station 4.
The number of link device points at the exclusive station 1 and 4 is shown below.
Link device
Remote input (RX)
Remote output (RY)
Remote registor (RWw)
Remote registor (RWr)
Description
Number of stations occupied
Exclusive station Exclusive of station 4
32 points
32 points
4 points
4 points
6.3 PLC Side Setting
Refer to
Section 6.3.1
Section 6.3.2
Section 6.3.3
128 points
128 points
16 points
16 points
6 - 19
1
2
3
4
5
6
7
8