Mitsubishi GOT1000 Series Connection Manual page 663

Allen-Bradley PLC
For details of Allen-Bradley PLCs, refer to the following manuals.
1 Direct CPU connection (setting of Allen-Bradley PLC)
Item
*1
Baud Rate
Parity
Control Line
Communication Driver
Duplicate Packet Detection
Station Address
Error Detection
*1 Set the Baud Rate according to the transmission speed setting on the GOT side.
For the transmission speed setting on the GOT side, refer to the following.
Section 17.3.3 Setting communication interface (Communication settings)
*2 Set the Error Detection according to the sum check format setting on the GOT side.
For the sum check format setting on the GOT side, refer to the following.
Section 17.3.3 Setting communication interface (Communication settings)
Manuals for Allen-Bradley PLCs
SLC500 Series
4800bps, 9600bps, 19200bps
EVEN
BCC
17.3.7 Checking for normal monitoring
Setting details
MicroLogix1000/1200/1500 Series
4800bps, 9600bps, 19200bps, 38400bps
NO HANDSHAKING
DF1 HALF-DUPLEX SLAVE
DISABLE
0
BCC, CRC
17.4 PLC Side Setting
17
18
NONE
19
*2
20
21
22
23
24
17 - 23