Checking For Normal Monitoring - Mitsubishi GOT1000 Series Connection Manual

19.6.7 Checking for normal monitoring

1 Write data to virtual devices inside GOT.
Send a message from the host to the GOT, and confirm that the values are stored in the virtual devices
inside the GOT.
( Section 19.7 System Configuration Examples)
2 Check for errors occurring on the GOT.
Presetting the system alarm to project data allows you to identify errors occurred on the GOT, PLC
CPU, servo amplifier and communications.
For details on the system alarm, refer to the following manual.
GT
Communication
Channel No.
Error code
Error message
Advanced alarm popup display
Write command
S
T RW 0100 000A 0163
X
User's Manual
With the advanced alarm popup display function, alarms are displayed as a popup
display regardless of whether an alarm display object is placed on the screen or not
(regardless of the display screen).
Since comments can be flown from right to left, even a long comment can be
displayed all.
For details of the advanced popup display, refer to the following manual.
GT Designer2 Version
E
0362 T D3
X
Microcomputer boar
(When using GT15)
Screen Design Manual
19.6 Preparatory Procedures for Monitoring
19.6.7 Checking for normal monitoring
Time of occurrence
(Displayed only for errors)
19 - 85
17
18
19
20
21
22
23
24