Mitsubishi GOT1000 Series Connection Manual page 1035

26.2.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "*" to the channel No. used.
2 Set the driver to "Printer".
3 Perform the detailed settings for the driver.
Number of available printer drivers
Screen Design Manual
Two or more drivers cannot be set.
If two or more printer drivers are set, the following error message will appear.
26.2.3 Setting communication interface (Communication settings)
26.2 Preparatory Procedures for Monitoring
25
26
27
28
29
30
31
26 - 7