Mitsubishi GOT1000 Series Connection Manual page 345

CONNECTION TO
OMRON PLC
9.1 System Configuration . . . . . . . . . . page 9-2
This section describes the equipment and cables needed
when connecting a GOT to an OMRON PLC.
Select a system suitable for your application.
9.2 Connection Cable . . . . . . . . . . . . page 9-17
This section describes the specifications of the cables
needed when connecting to an OMRON PLC.
Check the specifications of the connection cables.
9.3 Preparatory Procedures for Monitoring
. . . . . . . . . . . . . . . . . . . . . . . . . . page 9-23
This section provides the procedures to be followed before
performing monitoring in connection to an OMRON PLC.
This procedures are written on the step-by-step basis so
that even a novice GOT user can follow them to start
communications.
9.4 PLC Side Setting . . . . . . . . . . . . . page 9-37
The PLC side settings for GOT connection are explained.
When checking the PLC side settings, refer to this section.
9
9
10
11
12
13
14
15
16
9 - 1