29 - 14
29.4 Preparatory Procedure for Accessing
29.4.3 Verifying GOT recognizes connected equipment
(1) Transmission speed between PC and GOT
Match the transmission speed setting between the PC and the GOT with the
transmission speed set on the PC side.
(2) To change the communication interface setting on the utility
The communication interface setting can also be changed on the utility.
For details on the utility, refer to the following manual:
GT
User's Manual
1
After powering up the GOT, touch [Main
Menu]
[Communication setting] from
the Utility.
2
The [Communication setting] appears.
3
Verify that the following communication
driver name is displayed in the box for
the communication interface to be used.
• Host(PC)
4
When the communication driver name is
not displayed normally, carry out the
following procedure again.
Section 29.4 Preparatory
Procedure for Accessing