Mitsubishi GOT1000 Series Connection Manual page 1059

When changing communication interface setting by Utility
The communication interface setting can be changed by the Utility.
For details on the Utility, refer to the following manual.
GT User's Manual
27.1.9 Verifying GOT recognizes connected equipment
1 After powering up the GOT, touch [Main
Menu] [Communication setting] from
the Utility.
2 The [Communication setting] appears.
3 Verify that the following communication
driver name is displayed in the box for
the communication interface to be used.
• Communication driver
A/QnA/QCPU, QJ71C24
4 When the communication driver name is
not displayed normally, carry out the
following procedure again.
Section 27.1.3 Preparatory
Procedures for Monitoring
27.1 Direct Connection To CPU
25
26
27
28
29
30
31
27 - 17