Mitsubishi GOT1000 Series Connection Manual page 653

17.3.3 Setting communication interface (Communication settings)
Make the GOT communication interface settings on [Communication setting] of GT Designer2.
Select the same communication driver as the one installed on the GOT for each communication interface.
For details on [Communication setting] of GT Designer2, refer to the following manual.
GT Designer2 Version
1 Communication settings
1 Set "1" to the channel No. used.
2 Set the following to the driver.
• When connecting to SLC500 Series: AB SLC500, AB 1:N
• When connecting to MicroLogix1000/1200/1500 Series: AB MicroLogix
3 Perform the detailed settings for the driver. (
Screen Design Manual
Communication detail settingss)
17.3 Preparatory Procedures for Monitoring
17.3.3 Setting communication interface (Communication settings)
17
18
19
20
21
22
23
24
17 - 13