Mitsubishi GOT1000 Series Connection Manual page 1071

(4) Mode setting switch
Mode setting switch
8
MODE
(1) Switch setting example
For the switch setting example, refer to the following.
(2) When the switch setting is changed
When changing the switch setting after mounting the MELSECNET/10
communication unit to the GOT, reset the GOT.
(3) Self check test
Select "3" to "9" as the mode setting switch to provide a self check test of the
MELSECNET/10 communication unit.
For details, refer to the following manual.
Description
On-line
<Default: 0>
Section 5.3 PLC Side Setting
GT15 MELSECNET/10 communication unit User's Manual
27.2 MELSECNET/10 Connection (PLC To PLC Network)
27.2.5 Setting communication interface (Communication settings)
25
Setting
0
26
27
28
29
30
31
27 - 29