Ethernet Connection - Mitsubishi GOT1000 Series Connection Manual

27.4 Ethernet Connection

Connectable CNC is MELDAS C6/C64 series.
Select a system configuration suitable for your application.
27.4.1 System Configuration
1 System configuration and connection conditions
Connection conditions
Number of GOTs distance
128 (recommended 100m or less
to 16 units or less) (max.)
*1 The destination connected with the twisted pair cable varies with the configuration of the applicable Ethernet
network system.
Connect to the Ethernet module, hub, transceiver or other system equipment corresponding to the applicable
Ethernet network system.
2 System equipment
(1) GOT
Image No.
Ethernet
Ethernet communication unit
27 - 62
27.4 Ethernet Connection
27.4.1 System Configuration
Conventions used in this section
Numbers (e.g. ) of
to the numbers (e.g.
Use these numbers as references when confirming models and applications.
Expansion unit
2
Twisted pair cable
3
Name
• For Ethernet communication
System configuration and connection conditions correspond
) of System equipment.
System configuration
1
GT15-J71E71-100
Communication driver
QJ71E71/AJ71(Q)E71
Model name