Connecting To T2 (Pu224), T2E Or T2N - Mitsubishi GOT1000 Series Connection Manual

12.4 PLC Side Setting
PLC CPU

12.4.1 Connecting to T2 (PU224), T2E or T2N

1 Switch setting
Configure the switches.
(1) Operation mode setting switch
OFF ON
1
2
3
4
5
6
(2) DIP switch on module PCB (T2N only)
Switch No.
DIP switch: No. 1
*1 Can be used as RS-422.
2 Transmission parameter setting
Enter the transmission parameters.
Transmission speed
Data length
Stop bit
Parity bit
Station No.
*2 Indicates only the transmission speeds that can be specified on the GOT side.
*3 Fixed to 9600bps for T2E only
*4 Specify the transmission speed to match the baud rate of the GOT.
For how to set the baud rate of the GOT, refer to the following.
12 - 26
12.4 PLC Side Setting
12.4.1 Connecting to T2 (PU224), T2E or T2N
TOSHIBA PLC
For details of the TOSHIBA PLC, refer to the following manual.
User's Manual for the TOSHIBA PLC
Model name
T2 (PU224), T2E, T2N
T3, T3H
model 3000 (S2), model 3000 (S3)
For RS-232 communication
Item
*2*3*4
Section 12.3.3 Setting communication interface (Communication settings)
Switch No.
4
5
ON (RS-232C)
4800bps, 9600bps, 19200bps
7bit
2bit
Even
1
Refer to
Section 12.4.1
Section 12.4.2
Section 12.4.3
Setting
OFF (fixed)
OFF (fixed)
Setting
For RS-422 communication
OFF (RS-485
Setting
Set data
Computer link
*1
)