6.3.1
Connecting to CC-Link module (Q Series)
This section describes the settings of the GOT and CC-Link module (Q Series) in the case of system
configuration shown as
1
System configuration
<CC-Link module>
Type
Station No.
Mode
All connect count
Transmission speed : 156kbps
*1
The CC-Link module is mounted on the base unit slot 0.
The Start I/O No. of the CC-Link module is set to "0"
6 - 20
6.3 PLC Side Setting
6.3.1 Connecting to CC-Link module (Q Series)
.
CC-Link module (Q Series)
For details of the CC-Link module (Q Series), refer to the following manual.
CC-Link System Master/Local Module User's Manual QJ61BT11N
*1
(Use the default value for the settings other than the following.)
: Master station
: Station No.0
: Remote net (Ver.1 mode)
: 1
Switch setting of CC-Link module (Q Series)
[Network parameter] of GX Developer
[Communication settings] of GT Designer 2
Settings of CC-Link communication unit
<GOT> (Use the default value for settings other than the following.)
Station type
Station No.
Number of
stations occupied
Transmission speed : 156kbps
: Intelligent device station
: Station No.1
: Exclusive station 1