Mitsubishi GOT1000 Series Connection Manual page 1076

27 - 34
27.2 MELSECNET/10 Connection (PLC To PLC Network)
27.2.7 Attaching communication unit and connecting cable
Precautions for soldering
Note the following precautions when soldering the internal conductor and contact.
• Make sure that the solder does not bead up at the soldered section.
• Make sure there are no gaps between the connector and cable insulator or
they do not cut into each other.
• Perform soldering quickly so the insulation material does not become
deformed.
5 Insert the connector assembly shown in
plug shell and screw the nut into the plug shell.
into the